● Smart Phone APP
● 99 Zones,each zone can be renamed
● 10 zones are available for Voice Recording
● High-definition voice
● The Standard ADMECO Contact ID Protocol
● 99 wireless Zones,2 wired zones
● Up to 6 phone numbers to Dial out & 3 SMS Mobile numbers to send SMS on alarm
● Two-way Intercom
● Up to 3 groups of Timely Arm/Disarm
● Easy to code with Sensors/Detectors
● Remotely Arm/ Disarm /monitor / Intercom
● programming for zones.
● Voice prompt from Siren while arming/disarming by keyfob
● Internal Re-Chargeable Battery for the back-up of power failure
Wired Interfaces diagram:
Wired Interfaces:
SP+/SP- : Outputs for Wired Siren.
Z1/ Z2: 2 inputs for Wired Sensors
GND: Ground Wire
SP: Wired Siren, SP+ for Anode, ( Please pay attention to the anode and cathode. It is likely to burn the system if you connect inversely)
1:Wired Sensor #1: Zone 98
2:Wired Sensor#2: Zone 99
Cautions:
1: No more than 5V for the Voltage of the Wire.
2: To avoid of the damage of the Host, please Power off before Connecting the Wire with the Host.
3: The Host will recognize the Wired Zones automatically as soon as the wired sensors connect with the Host; and you can set on the Host whether the siren goes off or not when the wired sensors’ triggered.
Reviews
There are no reviews yet.